Copper flat bar is made of electrolytic copper with a purity of 99.9% or more by electroplating technology on low carbon steel. The thickness of copper plating layer at each point is 0.254mm or more. Specific application: it is used for equipment groundin
The corrosion resistance of galvanized flat steel installation copper is more than ten times that of steel, and copper plating is more than three times that of zinc plating.
The corrosion resistance of the copper-plated steel is close to that of pure copper, and the copper surface will produce oxide with strong adhesion (copper green Cu (OH) 2), which has a good protection effect on the internal materials.
The thickness of the copper-plated material of the grounding rod must be greater than 0.25mm, and the copper-plated stranded wire and copper-plated flat steel greater than 0.070mm can be used as the grounding grid to ensure that the grounding grid is free of maintenance for 40 years.
Strong current conduction capacity. At 20 ℃, the resistivity of copper is 17.24 × 10-6 (Ω mm), and the resistivity of steel is 138 × 10-6（Ω mm）。 Assuming that the conductivity of copper is taken as the reference value 1 (i.e. 100%), the conductivity of angle steel and galvanized round steel is only 8.6%, the conductivity of copper plated steel is more than 20%, and the conductivity of copper plated steel strand is 30%.
Under the action of high-frequency current such as lightning current, copper-plated steel will produce a skin effect, and its conductivity is close to that of pure copper, far higher than that of steel grounding body.
In addition, the relative permeability of copper to vacuum is 1, and that of steel is 636 times. When passing lightning current or fault current, the impedance of copper conductor is far less than that of steel grounding body, so the probability of a side strike caused by the increase of ground potential caused by impedance will be greatly reduced.
Excellent anti-corrosion performance
The material shows that 99.99% of the electrolytic copper molecules with a thick copper layer have an average thickness of more than 0.25mm, so they have strong corrosion resistance and a service life of more than 50 years.
Because the surface layer of copper is composed of 99.99% electrolytic copper molecules, it has excellent conductivity, and its self resistance is far lower than that of conventional materials.
The copper flat bar is applicable to soil conditions with different humidity, temperature and PH value.
Lightning protection and grounding works in petrochemical, oil storage, power plant, substation, communication base station, airport, network machine room, railway, subway and other places.
|Product name||Copper Flat Bar|
|Standard||GB, ASTM, JIS, ISO, EN|
|Certification||SGS, BV, etc|
|Size||Thickness: 3mm~100mm or as your requirements|
|Width: 10mm~310mm or as your requirements|
|Length: 2000mm~12000mm or as your requirements|
|Supply Ability||5000 tons / month|
|Lead Time||10-15 working days after the receipt of 30% deposit|
|Payment Terms||30%T/T Advance + 70% Balance|
|Price Terms||FOB, CFR, CIF, EXW|
|Packing||Standard sea-worthy package or as required|
|*If you do not find what you are
looking for, please call us now. If you have found it, we are happy to
answer any questions or concerns you may have about flat bar grades and assist you through the purchasing process.|
The order process of our Hanhuang Metal copper flat bar products:
Feasibility study & quotation
Offer is accepted by customer
Comfirmation on order details
Design&make the die for extrusion
Mold test,make samples
Sample approval,mass production
Q:Can you send samples?
A:Sample can be for free,freight cost collect.
Q:What product information do I need to provide?
A:Steel grade/thickness/width/quantity,these will decide the price.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:What are the certifications for your products?
A:We have ISO 9001,CE,SGS,BV and other certifications.
Q:How about the delivery time?
A:Regularly the delivery time around 10-15 days,customized one will inform the delivery time ahead.
Q:Does the product have quality inspection before loading?
A:All the products are strictly tested before packaging,also can inspect by third party inspection.
Q:How to pack the products?
A:Standard export package with waterproof film and wooden pallet.It can effectively protect products from corrosion.